High Level Interface - MODBUS Gateway

Code : N-MODBUS

Product availability : NSW, ACT, VIC

For further information, please contact your local branch, and our staff will assist you.

Requires NCM.

Details

Compatible with FireSense 2800 & 3030 Addressable Fire Panels
Compatible with standard and high speed NOTI•FIRE•NET^TM
Monitor four (4) compatible NFN or HS-NFN nodes not including the Modbus Gateway node itself
Provide data such as event type, active/inactive, isolate/deisolate, acknowledged/unacknowledged, device type and system faults
Support reads of up to 100 registers at a time - analog values can be read 10 registers at a time
Receive configuration data from the Modbus Gateway Configuration Tool
Log diagnostic information
Send standard Modbus exception responses
Reduce configuration time by self configuring all nodes and points

The Modbus Gateway provides a communication link between networks that use the Modbus/TCP communication protocol and Fire Alarm Control Panels (FACPs) resident on an NFN network.

The NFN network communicates with the Modbus Gateway through a NOTI•FIRE•NET^TM network via the network port on any NCM. The Modbus communication protocol is consistent with Modbus Application Protocol Specification V1.1b.

The Modbus Gateway Configuration Tool, a programming utility included with the Modbus Gateway assembly, is used to configure the Modbus Gateway. The Modbus Gateway is designed to need very little configuration. In most applications you will only need to enter the TCP/IP settings for your network and the nodes you would like
to monitor. The gateway will automatically map all the configured points and supply you with a user friendly value report.

Requires a Windows XP based computer to run the Modbus Configuration Tool.

Product Attachments