Analog Interface Module

Code : SSF-FMM-4-20

Product availability : NSW, ACT, VIC
For further information, please contact your local branch, and our staff will assist you.
  • 2 or 3 wire 4-20mA connection
  • Panel controlled status LED (bi-colour)
  • Analog communications
  • Rotary address switches
  • Low standby current
  • Mounts in standard 4’’ junction box (SMB-500)
  • FlashScan® operation

The SSF-FMM-4-20 Analog Input Module allows the AFP-3030 fire alarm control panel (FACP) to monitor industry-standard, linear-scale, 4-20mA protocol sensors.

The module converts the sensor output to communication protocol that can be interpreted by the FACP for monitoring and display. There are numerous sensors available that communicate using a 4-20 mA output, including gas sensors, temperature sensors, flame detectors and air speed sensors.

The SSF-FMM-4-20 Module includes numerous safeguards and protective features to ensure trouble-free operation. The external power supply is isolated from the communication line. In addition, a 500mA current limiter and a cutoff circuit protect the module’s electrical supply from short circuits. In the event of a short, the output voltage will cycle within safe limits until the short is removed. The output signal is sampled and filtered for transients and noise prior to passing the signal along to the FACP. If the current running through the sensing circuitry exceeds 25mA, the output voltage will shut down and the short protection process will begin.

The module accepts both 3-wire (device sink) and 2-wire configurations. The AFP-3030 panel supports up to five programmable thresholds for each SSF-FMM-4-20.

*This is an indent item. Lead times may apply.